← Back to latest news

Behind the scenes of a space launch – First moments of operating Reaktor Hello World

On Thursday morning, November 29th, the counter hit 0 and PSLV-C43 was ready for liftoff. The flight operator commanded engines to start and the rest was history for the Space Lab team.

In this Spacelog post we will provide you details of what’s happening behind the scenes of a satellite launch and initiating the operations.

Highlights of the launch day

 

6:28 – LIFTOFF: ISRO’s PSLV-C43 rocket starts the ignition – right on time

6:33 – Finalising the first stage burn, the heat shield is separated and the PSLV launcher steps on the next stage, at the altitude of around 200 kilometers

7:10 – After successful third and fourth stages, the main payload HySIS is injected to sun-synchronous low-Earth orbit. The launcher starts to change its orbit to a lower one

8:17 – Reaktor Hello World successfully deployed at 500 km orbit! Power production is turned on

8:18 – Beginning to warm up the sauna, opening the first round of sparkling

13:00 – RHW automatically turns itself on over the Atlantic ocean and starts to transmit Beacon signal

13:50 – On the first pass over Japan, our satellite beacon signal is received by three radio amateurs. The beacon is heard loud & clear; it’s confirmed that the satellite is alive and batteries are well charged

13:51 – Bringing the first round of champagne

14:13 – First pass covering northern Europe. Despite being low in the horizon, Reaktor’s ground station in Helsinki city center can hear the satellite and confirm that the satellite is hearing us

18:10 – RHW is being listened to by various radio amateurs around the World. Power production and battery levels above expected

20:15 – First good pass over Finland – Proper two-way communication established

20:25 – First round of sauna for the operators

21:48 – Second good pass over Finland – telemetry history is being downlinked and GPS turned on

22:00 – Second round of sauna for the operators

 

 

What’s next?

 

After checking that everything works as expected, the first test images of the hyperspectral imager were taken on Saturday and by the end of the first week the first images were downlinked and are being processed together with VTT.

So far, so good. As everything is working as planned, the team continues to operate the satellite. Stay tuned for updates!